BCDCQ - NR-150,POLYIMIDE SOLUTION
- MSDS: BCDCQ
- Manufacturer: E I DUPONT DENEMOURS AND CO INC
- Product Name: NR-150,POLYIMIDE SOLUTION
- National Stock Number: 6850-00K001548
Product Identification
Product ID:NR-150,POLYIMIDE SOLUTION
MSDS Date:01/01/1985
FSC:6850
NIIN:00K001548
MSDS Number: BCDCQ
Responsible Party
WILMINGTON, DE 19899
US
Emergency Phone: 800-441-7515
Info Phone: 800-441-7515
Cage: GO774
Contractor
Telephone: 800-441-7515;800-441-9442
Cage: 18873
Ingredients
N-METHYL-2-PYRROLIDONE,CAS# 872-50-4
CAS: 872-50-4
RTECS: UY5790000
Fraction By Weight: 25%
ACGIH TLV: >1000 PPM
AROMATIC TETRACARBOXYLIC ACID
Fraction By Weight: 33%
AROMATIC DIAMINES
Fraction By Weight: 17%
ETHYL ALCOHOL (ETHANOL)
CAS: 64-17-5
RTECS: KQ6300000
Fraction By Weight: 25%
OSHA PEL 1000 PPM
ACGIH TLV: 1000 PPM; 9192
Hazards
Effects of Overexposure:CAUSES EYE AND SKIN IRRITATION.CAUSES BURNING
SENSATION ON INHALATION.
First Aid
First Aid:REMOVE TO FRESH AIR. GET MEDICAL ATTENTION. EYES, SKIN: FLUSH
W. H*2O REMOVE/ ISOLATE CONTAM CLOTHING. KEEP WARM & QUIET. GIVE
CPR/OXYGEN IF NEED. STAY UPWIND. KEEP UNPROTECTED PERSONS AWAY FROM
AREA .
Fire Fighting
Flash Point:61F/16C OC
Lower Limits:3.28
Upper Limits:19
Extinguishing Media:WATER
Fire Fighting Procedures:WEAR SELF-CNTND BRTHG APP
Unusual Fire/Explosion Hazard:NONE NOTED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:EVACUATE AREA. KEEP UPWIND. WEAR
SCBA/PROTECTIVE CLOTHING. SM SPILL:ABSORB W SAND,EARTH, OTHER
ABSORBANT MAIL. LG:DIKE FOR LATER DISPOSAL. FLUSH AREA W WATER.
Handling
Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED.AVOID
BREATHING VAPOR.POLYETHYLENE LINED CONTAINERS RECOMMENDED.
Other Precautions:AVOID IGNITION SOURCES.USE WITH ADEQUATE
VENTILATION.WASH THOROUGHLY AFTER HANDLING.
Exposure Controls
Respiratory Protection:WEAR SCBA,IN FIRE, OTHERWISE NIOSH APPRVD RESPIR
Ventilation:LOCAL EXH:USE HOOD W FAN.MECHANICAL(USES GROUNDED
EQUIPMENT.
Protective Gloves:IMPERVIOUS
Eye Protection:CHEM SPLASH GOGGLES
Other Protective Equipment:USE OF APRONS SUGGESTED.
Supplemental Safety and Health
SYNONYM:POLYIMIDE PRECURSORS IN N-METHYLPYRROLIDONE.PHYSICAL DATA ARE
APPROXIMATES.
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:176F/80C
Vapor Pres:40
Vapor Density:UNK
Spec Gravity:10
Solubility in Water:APPRECIABLE
Appearance and Odor:LIQUID,SLIGHT AMINE ODOR.
Percent Volatiles by Volume:50
Stability
Stability Indicator/Materials to Avoid:YES
ETHANOL WILL REACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:NONE NOTED,BUT EXPECT CO, CO*2, H*2O.
Disposal
Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.